- #Micro pxn plus manual install#
- #Micro pxn plus manual update#
- #Micro pxn plus manual manual#
- #Micro pxn plus manual upgrade#
#Micro pxn plus manual upgrade#
To verify the build upgrade, refer to Verify your PXNplus firmware build on page 2.Ĥ 4 PXNplus CPU Board Firmware Upgrade instructions to PXNP_DIST_R113/PP_VER_121/SP_VER_7013 From PXNP_DIST_R111/PP_VER_119/SP_VER_7011 or later Using the Integrated Configuration Tool: Allocate 15 to 20 minutes per controller. Since the controller is going through the complete boot sequence and installing updates, it will need at least 8 minutes to connect back to the host.
The controller will reboot automatically after the file is uploaded.
#Micro pxn plus manual manual#
Refer to eflash instructions on page 8 and your host user manual for more information on eflash. Using eflash through the Secure Perfect or Picture Perfect host: Allocate about 20 minutes for upgrading each controller. Browse back into the controller and verify the build version is PXNP_DIST_R114/PP_VER_122/SP_VER_7514. The controller will then come online with the host. Secure Perfect/FCWnx - DS4 flashes twice per second and DS1 turns solid ON.
#Micro pxn plus manual update#
Once the flash update is complete, the following sequence will occur: Picture Perfect - DS4 flashes once per second and DS1 turns solid ON. The normal start of this LED sequence is DS3 solid ON for several seconds and DS7 solid ON for 30 to 40 seconds. This sequence is repeated three times while rebooting, once after each update. During this time, DS7 and DS8 alternate ON while the image is being copied and when the controller is installing the updates for kernel, web-server, and application.
#Micro pxn plus manual install#
Wait for 8 to 10 minutes for the controller to complete its boot sequence and install updates. Select NO, and click on Restart Controller to reboot the controller. When you click OK for the message, an alert will pop up asking if it can close the window. After the upload is complete, you should see a message Uploaded file processed correctly. Click Flash Micro and browse to the PXNP7514.efl file.
CAUTION: DO NOT reset or restart the controller in the middle of the flash process or the controller will become non-functional. Build Version - PXNP_DIST_R114 PP Version - PP_VER_122 SP Version - SP_VER_7514 R113 Build Version - PXNP_DIST_R113 PP Version - PP_VER_121 SP Version - SP_VER_7013 R112 Build Version - PXNP_DIST_R112 PP Version - PP_VER_120 SP Version - SP_VER_7012 R111 Build version: PXNP_DIST_R111 PP version: PP_VER_119 SP version: SP_VER_7111 R110 Build version: PXNP_DIST_R110 PP version: PP_VER_118 SP version: SP_VER_6118 R106 Build version: PXNP_DIST_R106 PP version: PP_VER_114 SP version: SP_VER_6114 R105 Build version: PXNP_DIST_R105 PP version: PP_VER_113 SP version: SP_VER_6113ģ 3 Upgrade instructions Upgrade instructions to PXNP_DIST_R114/PP_VER_122/SP_VER_7514 From PXNP_DIST_R111/PP_VER_121/SP_VER_7013 or later Using the Integrated Configuration Tool: Allocate 15 to 20 minutes per controller. Build versions If this build is installed. Document number/revision: R (October, 2009).Ģ 2 PXNplus CPU Board Firmware Verify your PXNplus firmware build 3. This document may not be copied in whole or in part, or otherwise reproduced except as specifically permitted under US copyright law, without the prior written consent from GE.
1 PXNplus CPU Board Firmware Introduction These are the PXNplus CPU Board Firmware ( R) for the following GE Security documents: M5 Controller Installation Manual ( G) Micro/PX-2000, Micro/PXN-2000, and Micro2000PXNplus Installation Manual ( M) Micro/PX-2000, Micro/PXN-2000, and Micro2000PXNplus Quick Installation Instructions ( N) M3000 Controller Installation Manual ( D) Copyright 2009, GE Security Inc.
0 kommentar(er)
